Maintenance Mechanic Resume: Sample and Free Template [2020]
Use these Maintenance Mechanic Resume Sample Bullets to create your Resume and land your dream job. All of these can be accessed for free in our in-product Maintenance Mechanic resume templates. Explore them below.
Search Maintenance Mechanic Resume Bullets for your Resume:
Performed various duties as needed to keep the facility in a clean and orderly condition
Performed daily inspections of the equipment and ensured all parts were in working order
Performed various duties in the maintenance of equipment and structures
Operated the Hvac equipment and maintained a clean work environment
Assisted in the installation of a variety production machinery and systems
Assisted with the setup and maintenance of a variety equipment, including forklift and pallets jack, forklift truck
Assisted the weld department with welding of parts and equipment for the company's new production line
Assisted the company in installing and repairing all HvAC systems
Assisted and supervised the maintenance of all packaging machines and associated equipment
Assisted on the job site with repairs and preventive
Assisted on the repair of all electrical and plumbing equipment in the facility, including electrical and plumbing
Assisted and supervised maintenance personnel in the operation of mechanical systems
Assisted General Motors with the repair and replacement of engines
Assisted manufacturing with the installation of equipment and components, performed preventive maintenance on equipment and components, performed preventive maintenance on production machinery and components
Assisted in the removal of old and damaged components from the aircraft
Assisted with the repair and installation of all conveyer equipment
Assisted the owner with daily maintenance of all buildings, including but not restricted to; plumbing, heating & vent systems
Assisted and supervised employees in the repair, installation of new equipment and parts, maintenance on all types of heavy duty vehicles and trailers including forklifts
Assisted and supervised the installation of electrical wiring for commercial and residential buildings in the area
Assisted and supervised the Maintenance Technician in performing preventitive, preventive and predictive maintenance on all equipment
Assisted and supervised mechanics in the installation of equipment, and troubleshooting
Assisted engineers in the development of a prototype welding machine, which was designed to reduce the amount of time spent on welding
Assisted technicians with troubleshot and replaced defective components on the following valves, fittings and pumps
Assisted other departments with the removal of contaminated waste, and maintained a log of hazardous materials
Assisted General Motors in the maintenance of production machinery and associated equipment
Assisted supervisor with all phases of the repair
Assisted with the repair and replacement of electrical systems
Assisted customers with the selection of their vehicles, and provided excellent service to the customer
Assisted mechanics with minor repair and maintenance of vehicles, equipment
Assisted technicians with installing and maintaining HvAC units
Assisted on the repair of all HvAC units
Assisted engineers in the development of new processes and methods for the fabrication of parts
Assisted production line with the maintenance of equipment and tools
Assisted supervisor with the daily operations of a maintenance facility
Assisted management with inventory, purchasing and scheduling of production equipment, maintained inventory control and ordering of parts
Assisted production line with assembly of parts, and performed quality checks on parts
Managed inventory of tools for the entire plant and coordinated with other departments to ensure all tools were in working orders
Managed 3 employees and was the main contact for any issues with the equipment
Managed work orders and performed repairs on valves
Managed work orders and equipment for the entire production cycle
Maintained all aspects of the conveyors and maintained a safe working environment for all personnel
Maintained all aspects of the plant, from electrical to plumbing
Maintained records of work performed and equipment
Maintained all equipment and supplies for the company, as well
Maintained proper weld quality and conformance to company specifications
Maintained high standards of cleanness and sanitation throughout the facility, as well a clean and sanitized kitchen
Assist the company in maintaining a clean and orderly warehouse environment
Assist journeymen in the operation of equipment and conveyors
Assist mechanics with the removal of fans and other parts
Assist in the repair and replacement of equipment
Provided all necessary equipment and parts for the job to complete
Provided training and technical guidance to mechanics on equipment and processes
Provided a safe and efficient working environment for the entire facility, and ensured all safety procedures are followed
Supervised and coordinated the work of workers in welding and fabrication
Supervised all aspects of the maintenance and repairs
Supervised all aspects of maintenance and repair on HMMWVs
Supervised all aspects of the repair and overhaul process for a variety of industrial and military vehicles
Completed and installed new equipment in a safe and effective way
Completed numerous repairs and modifications to the latches on a daily basis to include the replacement of bearings on a regular schedule
Completed a series of training courses to become a successful HvAC technician
Completed over 100 repairs and upgrades to the company vehicles
Prepared various types of equipment for the job, such a forklift and pallets jack
Prepared and installed new parts for the company's main distribution center
Prepared for and maintained a clean work area by washing all equipment, and cleaning up spills
Prepared for and maintained the plant
Prepared all necessary documents for the boiler to operate
Interpreted, documented and reported all repairs to the maintenance supervisor
Interpreted work order and communicated with supervisor to determine repairs
Interpreted company policies and procedure to determine the best method of handling hazardous waste
Interpreted specifications and made recommendations for equipment changes, upgrades or modifications
Interpreted customer specifications and blue print reading to diagnose problems, and determined the best repair procedures
Interpreted company policy and regulations to determine the best method of maintenance
Interpreted and repaired all types of valves
Interpreted test results and made adjustments to ensure that the equipment met specifications
Created a system to track and report on the progress of all maintenance and repairs
Created & implemented a new system to keep the building in a clean and safe working condition
Created detailed reports for each vehicle and maintained a daily, weekly log of all maintenance performed
Created and implemented a maintenance plan for the plant and its equipment
Created new processes and standards for equipment operation, resulting in a reduction of maintenance cost by 50%.
Trained new hires on proper maintenance and safety practices, as well
Trained to perform preventative and predictive
Trained all employees on proper use of machines, and how to properly operate machines
Trained staff on new equipment and maintenance
Trained on the use of various equipment
Trained, certified in the proper operation of equipment and maintenance procedures
Trained as a maintenance tech
Trained with the company to maintain and operate a fleet of vehicles
Trained to operate and troubleshooting of various equipment in a timely and safe mannor
Trained over 100 personnel on the use of equipment, and how to properly maintain the equipment
Reviewed and inspected all incoming parts for quality and compliance with company procedures
Utilized various tools and equipment to complete job assignments, such as HVac, AC ducts and plumbing
Utilized the proper tools and techniques to perform the tasks required
Utilized knowledge of electrical, mechanical and plumbing systems to repair, maintain or replace HVAC equipment
Utilized manual and mechanical tools to complete work orders and repairs
Utilized manual and automated equipment to complete repairs on various vehicles
Utilized power and hydraulic tools to perform repairs
Utilized power and hydraulic tools to complete repairs on all conveyors
Utilized OSHOTC and DOT standards for all equipment
Utilized a wide array of equipment to repair and replace worn parts
Utilized the proper valve setup and maintenance procedure for the entire plant
Utilized various hand-operated and automated tools to perform repairs
Utilized various tools and machinery to repair, install or maintain equipment
Utilized P&L's to ensure proper operation of the equipment
Utilized all types of hand, machine and fork lift to complete tasks on time
Utilized knowledge of all aspects and equipment
Utilized equipment to perform maintenance on vehicles and auxiliary power tools
Utilized various types of electrical and mechanical systems to repair, replace or maintain heating and cooling equipment
Utilized PLC's to produce and ship products, including packaging materials
Utilized all types of power equipment including forklift
Utilized multiple tools and machinery to complete job tasks, including forklifts
Monitored the operation of all equipment and performed preventitive
Monitored all aspects of the vehicle maintenance
Monitored daily operations of the manufacturing plant, ensuring all safety and quality requirements were being met
Monitored and maintained a high standard of cleanness and organization
Monitored the production process and reported problems or concerns to the supervisor
Monitored all equipment and vehicles for proper operation, safety precautions and maintenance procedures
Monitored machine operation to ensure conforming parts were being machined
Monitored machine operation to avoid problems and ensure production schedules
Monitored fluid level in the fuel tank and ensured all equipment was in good working conditions
Monitored and maintained the entire ladder
Monitored the work of all mechanics and technicians in the repair of equipment
Monitored all aspects of the job including, welding pipe and tubing
Monitored machines to make adjustments and made sure that the machine stayed in good condition
Started machine operations by inserting controls and moving throttling mechanisms
Started new line of business and grew to a full time employee
Started up and maintained a fleet of trucks, tractos and trailers for the oilfield industry
Started new machines in the field and trained others to operate them
Started new line of service for the facility and installed a new system for the entire facility
Started the first of many projects to be completed in the first six months of operation
Started all new machines in the shop and made adjustments as necessary to maintain the quality of parts
Assembled a new system for the plant to be more cost effective
Assembled equipment and performed routine repairs to ensure the highest levels of customer
Assembled the units and performed all repairs
Reviewed all repair requests and completed the required repairs in a timely manner to ensure the customer's needs are met
Reviewed repair requests and provided status reports to the maintenance department
Reviewed reports and inspections to determine the cause of any breakdown and made necessary repairs
Reviewed test reports and performed repairs as required to maintain the integrity of all valves
Reviewed equipment and work orders to determine repair procedures and equipment availability
Reviewed daily production and scheduled repairs to maintain proper functioning of equipment
Reviewed the work of other employees to check for machine and equipment malfurrences
Reviewed repair work and provided necessary documentation to complete the work
Reviewed work orders and schedules to determine material availability, sequence of work and materials needed
Reviewed the work of maintenance technicians to determine the best way of repairing andor maintaining the equipment
Reviewed the work of other workers to determine the most efficient and safe way to complete the task
Reviewed job orders and communicated with customers to determine the most cost effective repairs
Reviewed the work of other employees to check for quality and conformity of filled containers to specifications
Reviewed job orders and performed preventive maintenance on equipment, including oil change and filter replacement
Reviewed repair orders and communicated with customers to ensure that repairs are completed in a safe and efficient manner
Reviewed reports and logs to ensure that all repairs are performed within the required standards
Reviewed reports and inspections to determine the cause of a breakdown and determined the most cost-efficient means of replacing it
Reviewed repair orders and parts lists to ensure work is performed in a timely fashion
Helped customers with any problems that arose in the shop, and also worked with customers to make their vehicle more appealing
Helped maintain the plant and all other aspects of the facility
Helped the mechanics with any repairs that they may need to be done on their equipment
Helped build and maintain a fleet of over 200 vehicles and equipment
Helped the weld department with welding and fabrications of the parts
Helped develop and maintain a new mechanical systems for the plant
Helped design and build a custom-made CMM for the company
Helped develop and maintain a new tool room for the welding department
Helped make the shop run more efficient and safe for the customers
Helped in the repair of production machinery, such machines used in the manufacturing of automotive parts
Helped maintain the building and all equipment in a neat, clean and organized manner
Helped train and mentor other maintenance personnel on the use of equipment
Helped keep the plant operating at a steady speed and to keep the machines running at a steady pace
Helped move and repair HVs to new homes
Helped move and repair machinery
Helped to maintain the safety of all personnel and work areas in the plant
Helped maintain and operate a variety of equipment
Helped build and repair a variety of machinery, from forklift to palatalift
Coordinated daily work flow with other team leaders to meet daily production goals and deadlines
Coordinated with the Engineering department to ensure all maintenance and repairs are performed in a safe and efficient manner
Made repair and maintenance recommendations for electrical systems, components and equipment to include wiring harnesses