Electrical Engineer

Questions

165 Questions

Clicking on the following links will update the content below

1.
Where do you see yourself in 5 years from now? selected
2.
Why should we hire you?
3.
What kind of projects have you worked on?
4.
Why do you want to work for us?
5.
Are you willing to travel and relocate, domestically or internationally, for an indeterminate amount of time?
6.
Why do you want to become a microwave engineer?
7.
What is your biggest weakness?
8.
What are your career goals?
9.
What was the most difficult class you've taken so far?
10.
What is a practical application for the Fourier transform?
11.
Tell me about a time when you overcame adversity.
12.
How do you manage stress?
13.
What experience do you have with electronics?
14.
What was your previous internship work?
15.
How would you design a plane system to be safe?
16.
What would be the use of a state machine which outputs 1 only when it has received the same input several times in a row?
17.
What are your expectations from Dahlgren, VA?
18.
What is it about robotics that interests you?
19.
Tell me about your past work experience.
20.
What area of electrical engineering do you like the most?
21.
What is a rectifier circuit?
22.
How would you design an active low-pass filter?
23.
What was the project that you conducted?
24.
Please go through your resume and tell me about your design experiences.
25.
What are your strengths and weaknesses?
26.
How do you handle pressure?
27.
How will you calculate the voltage divider?
28.
What are the different ways of starting an electrical machine?
29.
What do you know about LTE?
30.
Tell me about a time when you took the lead on a project.
31.
How would you define leadership?
32.
Tell us about a time when you had problems with your team member.
33.
What is the toughest decision you have ever made?
34.
What do you think comes out of an outlet?
35.
How will you describe your experience with micro controllers?
36.
Please discuss and whiteboard a design for a data recording device.
37.
What are the equations for current through a capacitor and voltage across an inductor?
38.
How does your experience relate to Burns and McDonnell?
39.
How are the plans created?
40.
When can you join us?
41.
What are some of your weaker areas?
42.
What do FPGA and ASIC stand for?
43.
How will you benefit Enercon?
44.
What is the difference between a circuit breaker and a fuse?
45.
How do you work in a team?
46.
What is a transformer in the context of software engineering?
47.
How would you describe an ideal op amp?
48.
What is your role in a group project?
49.
What leadership positions have you taken in your extra-curricular activities?
50.
What are you working on at your current job?
51.
What is GIS?
52.
What was your favorite subject in school?
53.
How fast can you learn a new subject?
54.
What kind of career are you looking for?
55.
Are you willing to travel for work?
56.
Describe a problem you faced in your work and how did you solve it?
57.
How would you draw a low pass filter?
58.
Why is the cutoff frequency of a filter defined as -3dB?
59.
Tell me about a time when you had to lead a team and people did not agree with the decisions you were making.
60.
How would you handle a subordinate who refuses to perform an assigned task?
61.
How will you handle conflict?
62.
How would you deal with a coworker that you had a problem with?
63.
How will you draw the logic diagram for a specific output?
64.
How would you design a project in this position?
65.
What creates an offset voltage on an OA in a circuit?
66.
What do you know about sensors?
67.
What is your previous experience?
68.
How did you find out about us?
69.
Are you okay with travel?
70.
How do you handle difficult situations?
71.
How would you filter a noisy pressure sensor?
72.
What drives you?
73.
What are the causes of common-mode conversion?
74.
What is a circuit breaker?
75.
What is the difference between Java and C++?
76.
Tell me about yourself.
77.
What is the one time you lost your temper at work?
78.
What is the unit of charge?
79.
How do you feel about working on multiple projects simultaneously?
80.
What if the ground of the circuit is not continuous?
81.
How did you overcome a difficult time?
82.
What can you tell us about this circuit card Assembly?
83.
Tell me about a time when you had to compromise on your ideas.
84.
What is the biggest challenge you face in completing a project?
85.
How long can you work for us as an intern?
86.
Have you ever made a mistake?
87.
How will you filter from an output 200Hz when all we need is to obtain the output at 100 Hz.
88.
How often do you use your cell phone?
89.
What is your experience with projects?
90.
How will you describe the behavior of an amplifier in saturation?
91.
What is your software background?
92.
How do you measure ripple current?
93.
Q: What is your experience with RF?
94.
What made you choose your major?
95.
Draw a circuit on the board and figure out the current in a specific spot.
96.
Tell me about a time when you had to deal with a difficult situation.
97.
How would you find the DH Parameters of a 4 DOF Robotic Arm?
98.
What motivates you to work harder than the rest of your co-workers?
99.
What is an electrical engineer?
100.
Tell me about a time when you had to coach another employee, what was your methods and what was the outcome?
101.
Please describe the operation of this control panel, given this electrical schematic.
102.
Tell me about your most successful project?
103.
How do you test a circuit?
104.
Tell me about a time when you had a conflict with one of your co-workers or classmates and how did you resolve it?
105.
What is your biggest failure?
106.
What is your experience with difficult teammates?
107.
What is your ideal team or work group?
108.
What do transformers, relays and circuit-breakers have in common?
109.
What is your greatest achievement?
110.
How do you ensure that a project schedule is maintained?
111.
What is your experience with FPGA?
112.
How do you design a typical program?
113.
How would you search and collect social security numbers in a diverse filesystem?
114.
How would you solve a complex problem with limited resources and data?
115.
What is the perfect job for you?
116.
Tell me about a project that you've been involved in.
117.
What safety measures would you take while performing your job duties?
118.
How will you measure the current in a given circuit?
119.
What is your academic GPA?
120.
How would you deal with a team member that didn't do any work?
121.
If you are hired by a kite company to raise their profit of selling kites, what will be your first step?
122.
What makes you an expert?
123.
What is your salary expectation?
124.
What do you know about our company?
125.
What was the most important thing you learned from your course?
126.
How will you match impedance on a transmission line to achieve maximum power transfer?
127.
How would you design a low pass filter in Matlab?
128.
How much do you know about power distribution systems?
129.
Why do you think Google is a good fit for you?
130.
How do you organize your current project?
131.
What motivates you to get up in the morning?
132.
What was a time you had a difficult team member and how did you resolve the issue?
133.
How would you design a webcam that had to last for 20 years?
134.
Tell me about a time when you had to come up with an innovative solution to a difficult problem?
135.
What is your major and what are you interested to work?
136.
What is the one thing that you are best at?
137.
What do you know about substations?
138.
Tell me about a project you're most proud of and what did you enjoy most about it.
139.
How would you differentiate between an IIR and FIR filter?
140.
What is the difference between a DFT and DTFT?
141.
How do you manage when you have too much work and not enough time?
142.
Are you a US citizen?
143.
Tell me about a time when you were a leader.
144.
What is the last time you failed to finish what you started?
145.
How will you implement line differential protection?
146.
What is a low pass filter and what is the main source of noise?
147.
How will you select the switching mode topology?
148.
What do you know about L&T?
149.
How would you design a capacitive sensor so that measurements remain as accurate as possible during operation?
150.
Are you willing to relocate?
151.
Why do you want to work in power industry?
152.
How would you handle a non-cooperative team mate?
153.
What is your travel policy?
154.
How will you draw a digital circuit given a representation?
155.
What do you like to do in your spare time?
156.
What is the most important thing to think about on the job?
157.
Why do you want to leave your current job?
158.
What was a project that meant a lot to you?
159.
What do you know about substation design?
160.
How do you handle your work in difficult situations when you are bombarded with multiple deadlines?
161.
What is your greatest strength?
162.
If I give you back a drawing covered in red ink, how will you take it?
163.
What kind of experience do you have?
164.
How would you test a vending machine?
165.
What do you know about BAE and our team?

Question 1 of 165